G32 intake manifold for two downdraft Mikuni-Solex carbs

Something that is just not what you want but you still need?
Post Reply
User avatar
mitsuman
Posts: 468
Joined: Sun Feb 26, 2017 10:18 am
Location: Des Moines, Iowa, United States
Contact:

G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by mitsuman » Sun Jul 16, 2017 10:56 pm

http://pl1746.pairlitesite.com/parts/P4 ... 16_Top.JPG
P4007774_Dual-2832-manifold_2017-07-16_Top.JPG
http://pl1746.pairlitesite.com/parts/P4 ... Bottom.JPG
P4007774_Dual-2832-manifold_2017-07-16_Bottom.JPG
http://pl1746.pairlitesite.com/parts/P4 ... tboard.JPG
P4007774_Dual-2832-manifold_2017-07-16_Outboard.JPG
http://pl1746.pairlitesite.com/parts/P4 ... nboard.JPG
P4007774_Dual-2832-manifold_2017-07-16_Inboard.JPG

This is a Mopar Direct Connection P4007774.
It mates the G32 engine to two stock 28-32 Mikuni-Solex downdraft carburetors.
No other parts came with it when I purchased it on eBay ten to fifteen years ago.
I expect linkage and carb setup would be big challenges here.
I'm certainly not up to the task.
This piece needs to move on to someone who knows what they're doing.

I'm asking Chrysler's December 1986 list price: $105.30
You do not have the required permissions to view the files attached to this post.
Greg
Des Moines, Iowa, United States
http://www.mitsus.org

Active fleet:
2000 Nissan Maxima SE
1978 Dodge Colt coupe ("Volga")
1982 Plymouth Sapporo

* Any advice provided is primarily in the context of U.S. market vehicles.

User avatar
Natedog
Posts: 150
Joined: Mon Feb 27, 2017 2:31 pm
Location: Hartselle AL

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Natedog » Mon Jul 17, 2017 9:09 am

Just FYI, the carbs and linkage will swap from a 2.0 twin carb manifold to this one. I assume the air filter set up as well, since the carbs are spaced the same.
49 International KB-2
72/73 Dodge Colts
92 Talon AWD Auto
93 Eclipse EDM
99 Montero Endeavor

User avatar
Team_Harco
Posts: 230
Joined: Mon Feb 27, 2017 3:52 am
Location: South Lyon, Michigan

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Team_Harco » Mon Jul 17, 2017 11:29 am

Then what do you do for jets? These things need to be tuned.
Scott
Team Harco Motorsports
"Win on Sunday, Sleep on Monday"
75 Colt Rally car "Stig", 76 Colt Race car "Sammy", 74 Colt street car project "Dinsdale"
...and more than a dozen other toys...

User avatar
Old Colt
Posts: 449
Joined: Sun Feb 26, 2017 8:22 am
Location: Vermont USA

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Old Colt » Mon Jul 17, 2017 2:04 pm

Jetting is surprisingly close.
Regards,
CharlieN

User avatar
Natedog
Posts: 150
Joined: Mon Feb 27, 2017 2:31 pm
Location: Hartselle AL

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Natedog » Mon Jul 17, 2017 4:08 pm

Yes, the jetting was so close that with a small cam and header my 1.6 was spot on with a little adjusting.
49 International KB-2
72/73 Dodge Colts
92 Talon AWD Auto
93 Eclipse EDM
99 Montero Endeavor

User avatar
Team_Harco
Posts: 230
Joined: Mon Feb 27, 2017 3:52 am
Location: South Lyon, Michigan

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Team_Harco » Tue Jul 18, 2017 4:38 am

Good to know. If I don't have enough parts to go with twin sidedrafts on the next engine I build (in 5 years?).
Scott
Team Harco Motorsports
"Win on Sunday, Sleep on Monday"
75 Colt Rally car "Stig", 76 Colt Race car "Sammy", 74 Colt street car project "Dinsdale"
...and more than a dozen other toys...

reom34
Posts: 2
Joined: Mon Sep 25, 2017 1:36 am

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by reom34 » Wed Sep 27, 2017 1:55 am

Hello from Spain.
I am looking for this intake manifold for my colt lancer 4g32.
Can you tell me where can buy one of this please?
Thanks

User avatar
Natedog
Posts: 150
Joined: Mon Feb 27, 2017 2:31 pm
Location: Hartselle AL

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by Natedog » Wed Sep 27, 2017 12:13 pm

They were sold in the 70's from Dodge, you'll just have to search and wait till one pops up... They do come along from time to time.
49 International KB-2
72/73 Dodge Colts
92 Talon AWD Auto
93 Eclipse EDM
99 Montero Endeavor

User avatar
mitsuman
Posts: 468
Joined: Sun Feb 26, 2017 10:18 am
Location: Des Moines, Iowa, United States
Contact:

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by mitsuman » Sun Oct 01, 2017 2:46 pm

reom34 wrote:Can you tell me where can buy one of this please?
I still have one for sale.
$105.34 plus shipping.
I'd expect shipping to cost $75-$100 to Spain.
Message me with a shipping address and I'll run some estimates, or you can estimate from 50317 to you.
Greg
Des Moines, Iowa, United States
http://www.mitsus.org

Active fleet:
2000 Nissan Maxima SE
1978 Dodge Colt coupe ("Volga")
1982 Plymouth Sapporo

* Any advice provided is primarily in the context of U.S. market vehicles.

NZ Bob
Posts: 1
Joined: Thu Oct 25, 2018 5:19 pm

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by NZ Bob » Thu Oct 25, 2018 5:21 pm

are these still available or is there second hand setup?

User avatar
mitsuman
Posts: 468
Joined: Sun Feb 26, 2017 10:18 am
Location: Des Moines, Iowa, United States
Contact:

Re: G32 intake manifold for two downdraft Mikuni-Solex carbs

Post by mitsuman » Fri Nov 16, 2018 11:23 am

NZ Bob wrote:
Thu Oct 25, 2018 5:21 pm
are these still available...
This part has not been available from Direct Connection for at least fifteen years.
Mine is still available.
Greg
Des Moines, Iowa, United States
http://www.mitsus.org

Active fleet:
2000 Nissan Maxima SE
1978 Dodge Colt coupe ("Volga")
1982 Plymouth Sapporo

* Any advice provided is primarily in the context of U.S. market vehicles.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest